Service, Maintenance And Disposal; Detailed Information On The Optional Equipment; Releasing Pressure Before Maintenance Work; Before Every Start-Up - Fronius Robacta TSS /i Operating Instructions Manual

Service, maintenance and disposal

Detailed Informa-
NOTE!
tion on the
For detailed information on the optional equipment, consult the available installa-
Optional Equip-
ment tion instructions or Operating Instructions for the optional equipment.
Releasing Pres-
sure before Main-
tenance Work
Danger due to compressed air stored at 16 bar in the pressure booster.
Serious injuries may result.
▶
▶
Release pressure:
Before Every -
Start-up -

Daily

NOTE!
Only clean the devices with cleaning products that are free of solvents.
1
WARNING!
Switch off the compressed air supply and release stored compressed air before
maintenance and servicing.
During maintenance and servicing, keep the device de-energized and depressur-
ized.
Check the fill level in the parting agent container and top up if necessary
Check cleaning brushes for contamination and wear; replace them if necessary
Remove any deposited parting agent and contamination from the outside of the base
unit and cleaning unit.
Disconnect compressed air supply
1
Open valve
2
Fully release pressure
91