Shift Lever; Removing The Shift Lever - Sega -RaceTV Owner's Manual

11

SHIFT LEVER

● When working with the product, be sure to turn the power off. Working with the
power on may cause an electric shock or short circuit.
● Be careful not to damage the wires. Damaged wires may cause an electric
shock, short circuit or present a risk of fire.
If the shift lever switch input does not function correctly on the INPUT TEST screen, the switch
may need to be replaced. To carry out this maintenance, you must first remove the shift lever unit.
For this task, you will need a tamperproof wrench (for M5 screws), /and a Phillips-head screw-
driver (for M4 screws).
11-1

REMOVING THE SHIFT LEVER

1
Turn the power OFF
2
Using the M5 tamperproof wrench remove the four tamperproof screws, 1 located in each
of the corner of the Shift Lever.
3
Gently lift out the Shift Lever to reveal the wiring harness, locate the plug connecting it to
the Control panel and remove the connection. The Shift Lever can now be extracted.
4
When re-installing the Shift Lever follow the above instructions in the reverse order. At
this time ensure that the 'DOWN' display appears on the upper part of the Shift Lever as
shown.
5
After the Re-installation of the Shift Lever, be sure to check the INPUT TEST in the Game
Test mode to determine it's correct operation.
11
65