Connecting The Communication Cable - Sega -RaceTV Owner's Manual

19-2 CONNECTING THE COMMUNICATION CABLE

To enable network play, the hubs inside each of the game machines involved must be connected with network (LAN)
cables.
Connect the hub inside one of the machines to the hubs in each of the other machines using LAN cables. There is no
need to connect the other machines to each other.
Do not connect LAN cables to game machines when they are not used for network play.
1
Turn off the power and unplug the power cord from the outlet.
2
Using Chapter 7 of this manual as reference, move the machines so that they are lined up.
Leave enough space on the back lid side of the machine to perform the rest of the operations in this
procedure.
3
The edge holders (the holes through which the LAN cables are threaded) are located on the left and right
sides of the lower back lid. Decide how the LAN cables should be threaded according to the layout of the
machines. To reach the edge holders, loosen 2 of the screws on the cable cover and slide the cover aside.
SCREW (2), black
19-2 FIG. 01
M4x8, w/flat & spring washers
4
Tighten the 2 screws firmly to secure the cable
cover in place.
SCREW (2), black
M4x8, w/flat & spring washers
19-2 FIG. 02
19-2 FIG. 03
CABLE COVER
19
103