Table of Contents
Advertisement
SHIFT LEVER
12
● When working with the product, be sure to turn the power off. Working with
the power on may cause an electric shock or short circuit. However, the unit
must be switched on when using TEST MODE. Do not touch any part of the unit
except those areas indicated.
● Be careful not to damage the wires. Damaged wires may cause electric shock or
short circuit or present a risk of fire.
● This work should be performed by the site maintenance individual or other
skilled professional. Performing work with non-technical personnel can cause
electric shock.
● Do not touch the steering wheel when switching on the unit. The steering wheel
undergoes automatic initialization after the unit is switched on. Touching the
steering wheel could lead to injuries.
● When removing or attaching the parts, be careful that your hands or fingers do
not get caught in anything.
After replacing the switch, always go to the INPUT TEST screen in GAME TEST MODE
and check whether the switch is ON or OFF.
12-1 CHECKING THE MICROSWITCHES
Check the microswitches on the shift lever once a month. At the same time, check the handling of the shift lever.
1
Display the INPUT TEST screen in the GAME TEST MODE.
2
Operate the shift lever and check that "ON" and "OFF" display properly (to the right of each shift) from
"SHIFT1" to "SHIFT4". The shift lever has 3 microswitches. Different combinations of "ON" and "OFF"
will change the display for each shift.
57
SHIFT LEVER
12
Advertisement
Table of Contents
