Shift Lever - Sega Daytona Championship USA Owner's Manual

11-5 SHIFT LEVER

● When working with the product, be sure to turn the power off. Working with the
power on may cause an electric shock or short circuit.
11
● Be careful not to damage the wires. Damaged wires may cause an electric
shock, short circuit or present a risk of fire.
If the shift lever switch input does not function correctly on the INPUT TEST screen, the switch may need to be re-
placed. To carry out this maintenance, you must first remove the shift lever unit.
For this task, you will need a tamper proof wrench (for M5 screws), /and a Phillips-head screwdriver (for M4
screws).
11-6 REMOVING THE SHIFT LEVER
1
Turn the power OFF
2
Using the M5 tamper proof wrench remove the four tamper proof screws, 1 located in each of the corner of
the Shift Lever.
3
Gently lift out the Shift Lever to reveal the wiring harness, locate the plug connecting it to the Control panel
and remove the connection. The Shift Lever can now be extracted.
4
When re-installing the Shift Lever follow the above instructions in the reverse order.
5
After the re-installation of the Shift Lever, be sure to check the INPUT TEST in the Game Test mode to
determine it's correct operation.
82
11-6 fig. 01