Assemble Front Design Plate - Sega -RaceTV Owner's Manual

6-1-3 ASSEMBLING FRONT DESIGN PLATE
The FRONT DESIGN PLATE attaches to the ASSY BILLBOARD. Please follow these
instructions to secure in place.
The FRONT DESIGN PLATE is located within the ASSY INSTALLATION �IT. Carefully
remove the portective and offer up the the front side of the ASSY BILLBOARD.

1.
2
3
8
Remove the 4 fixings
from the Billboard Box.
Fit the DESIGN PLATE into
the groove at the bottom
of the BILLBOARD BOX
Secure the FRONT DESIGN
PLATE to the BILLBOARD
using the screws removed
from step �.