Table of Contents
Advertisement
6-1-2 INSTALLATION OF THE AC COVERS
ONLY QUALIFIED SERVICE PERSONNEL should carry out this operation
BE SURE THAT THE MACHINE IS NOT CONNECTED TO THE MAIN SUPPLY
The AC Wire Covers are used for protecting the interconnecting wiring and the CAT5
LAN cable. When carring out this operation be careful not to trap and wires between
the covers. Pay attention when handling the CAT5 Lan cable as excessive bending will
cause damage.
1.
Attach AC Cover A to the rear of the cabinets as shown.
2.
Make all wiring connections between the two cockpits and the Coin Chute
tower. The wiring connectors are tagged and should not be fitted into the
locations. Do not force any connectors.
3.
Connect the earth wires between the two AC brackets, the AC covers and the
Coin Chute Towers.
4.
Insert the CAT5 Lan cable from the Left hand cockpit, through the wire cover
into the recieving connector within the Right hand AC Bkt.
5.
Secure the AC cover C and AC cover D using the scews provided
BEFORE ATTEMPTING THIS OPERATION.
7
Advertisement
Table of Contents
