Table of Contents
Advertisement
6-2 ATTACHING THE DVD DRIVE AND KEY CHIP
6
Connect the DVD Wire ( Metres) to the LINDBURGH connect the connector on
the side with the LINDBURGH tag. The 'USB MINI A' can be connected to any of
th ports - , This manual shows ig being connected to Port #.
7
Take the other end of the DVD wire (m) the end with the DVD tag and pass Pass
it out through the cabel entry hole.
8
Pull the cabel out through the hole and connect it to the DVD Drive.
9
Pass the DVD wire (m) through the edge holder (the rectangular frame-shape plastic
part). Pressing down on the edge holder from above will make it strech elastically and
open up
.
10
Re-attach the lower back lid, and fasten it with the six screws removed earlier
11
Close the lid and fasten the seat in its original position, refer to steps - 7 and work
them in reverse order.
(See - Fig 08)
.
Advertisement
Table of Contents
