Input Test - Sega -RaceTV Owner's Manual

9-3-2 INPUT TEST

Select INPUT TEST to display the following screen and check the status of input devices.
This test should be used periodically to check that each input device is functioning correctly.
9
Test the STEERING, GAS and BRAKE controls to ensure that they are functioning properly and that the parameters
change smoothly as each input device is operated.
Display N, UP and DOWN using the GEAR POSITION. N should display there is no control input. Verify that both
UP and DOWN display in sync with the position of the gear shifter.
Other controls are working properly if the OFF display changes to ON when operating the corresponding input
device.
Press the SERVICE and TEST Buttons simultaneously to return to the Game Test Menu Screen.
START
VIEW CHANGE
9-3-2 FIG. 02
48
STEERING
GAS
BRA�E
GEAR POSITION
START
VIEW CHANGE
BOOST
SERVICE
TEST
PRESS TEST AND SERVICE B�TTON TO EXIT
9-3-2 FIG. 01
STEERING
BRAKE
INP�T TEST
00H
00H
00H
N
OFF
OFF
OFF
OFF
OFF
GEAR POSITION
BOOST
GAS
TEST
SERVICE