Communication Play; Installation Precautions - Sega -RaceTV Owner's Manual

Table of Contents

COMMUNICATION PLAY

For this game, up to 4 machines can be connected to allow up to 4 players to play simultaneously. In this instance,

connecting the communication cable and setting for the communication play are required.

• Before starting to work, ensure that the Power SW is OFF. Failure to observe this can

cause electric shock or short circuit.

• Use care so as not to damage wirings. Damaged wiring can cause electric shock or

short circuit.

• Do not touch undesignated places. Touching places not designated can cause

electric shock or short circuit.

• The work described below should be carried out by the site maintenance personnel

or other qualified professional. Work carried out by personnel without the necessary

skill or technology can cause accident.

• To perform work safely and avoid serious accident such as the cabinet falling down,

do not perform work in places where step-like grade differences, a ditch, or slope

exist.

• To prevent accidents while working or while operating the product after it has been

installed, be sure not to conduct any procedures other than those given in this

manual. There are cases in which procedures not covered in this manual require

special tools and skills. If a procedure not given in this manual is required, request

service from the office given in this manual or from the point of purchase.

• To perform work safely, be sure to secure the space corresponding to number of

machines to be linked. Failure to observe this can cause accident.

• To avoid accidents, use a cable cover that will not cause patrons to trip when laying

network cables in areas of heavy foot traffic.

• To prevent accidents and acts of vandalism, cover the network cables with the

strongest cover possible.

Since 2 or more machines are to be linked, sufficient power corresponding to the number of machines used need to

be supplied. Note that as a standard, the per machine capacity should be 7 A for the 100-120 V area, and 4 A for the

220-240 V area.

101

Table of Contents