Adjusting/Replacing The Volume - Sega -RaceTV Owner's Manual

10-2
Adjustment Procedure
1
Loosen the two screws that secure the VR bracket, and adjust the gear and the angle of
engagement by moving the VR bracket.
10
2
Center the steering wheel, and engage the gear while making sure that the D-cut flat edge
of the volume axis is aligned in the direction indicated (see 10-2 FIG. 01).
3
Tighten the two screws and secure the VR base.
4
Turn the steering wheel and check that the gears move smoothly.
5
Close and secure the control panel.
6
Switch on the unit. Be careful not to touch the steering wheel when doing so. After the unit
is switched on, the steering wheel undergoes automatic initialization.
7
Configure the volume values on the INPUT ASSIGNMENTS screen in Game Test Mode.
It is recommended that the steering wheel volume be set to 80H±8H when the steering
wheel is centered. Confirm that when the steering wheel is turned to the left the numbers
decrease, and when it is turned to the right the numbers increase (see Service Manual).
62

ADJUSTING/REPLACING THE VOLUME