Fluorescent Light/Other Lamps Replacement - Sega -RaceTV Owner's Manual

15

FLUORESCENT LIGHT/OTHER LAMPS REPLACEMENT

• When working with the product, be sure to turn the power off. Working with the
power on may cause an electric shock or short circuit.
15
• You may get burned by a hot fluorescent lamp or other lamps. Pay full attention to
the lamps when performing the work.
• Be sure to use lamps of the designated rating. Using lamps of undesignated rating
can cause a fire or malfunctioning.
• There is the danger of short circuits or smoke generation due to deterioration of
insulation in lighting fixtures resulting from age deterioration. Check for anomalies
such as the following: Does it smell like something is burning? Is there socket
discoloration? Are any lamps being replaced frequently? Do lamps not go on
properly?
• Be careful when handling the plastic parts. Failure to observe this may cause injury
or damage due to fragments, etc.
• Do not attempt to replace billboard fluorescent lamps while standing on the base. If
you should misstep while working, you could stumble or fall down.
Remove the rear cover from the ASSY BILLBOARD
by unscrewing the 3x Philips fixings.
86
15 FIG. 01