Sega -RaceTV Owner's Manual page 95

3
Remove the Switch Plate. The Switch Plate
contains wiring connections. Disconnect the
connector, taking care not to damage the wiring.
15
4
There is a metal fitting at the base of the buttons on the Button Plate. Rotate this metal fitting to unlock it,
then remove the printed circuit board from the Button Plate.
15 FIG. 07
5
Press and turn the lamp counter-clockwise to
remove it.
88
SWITCH PLATE
BUTTON PLATE
Unlock.
LAMP 6.3V 1W
390-5445-01
15 FIG. 09
Disconnect the connector.
15 FIG. 06
15 FIG. 08
PRINTED CIRCUIT BOARD