Table of Contents
Advertisement
12
ACCELERATOR & BRAKE
● When working with the product, be sure to turn the power off. Working with the
power on may cause an electric shock or short circuit. However, the unit must
be switched on when using test mode. Do not touch any part of the unit except
those areas indicated.
● Be careful not to damage the wires. Damaged wires may cause an electric
shock, short circuit or present a risk of fire.
● This work should be performed by site maintenance personnel or other skilled
professionals. Work performed by non-technical personnel can cause a severe
accident such as an electric shock.
● To prevent accidents while working or while operating the product after it has
been installed, be sure not to conduct any procedures other than those given
in this manual. There are cases in which procedures not covered in this manual
require special tools and skills. If a procedure not given in this manual is re-
quired, request service from the office given in this manual or from the point of
purchase.
Do not touch the steering wheel when switching the unit on. The steering wheel
undergoes automatic initialization immediately after the unit is switched on.
Be sure to perform volume's move value setting in the Input Test in the Game Test
Mode after replacing or adjusting the Volume.
If the accelerator or brake pedals are not functioning correctly, you may need to adjust the posi-
tioning of the volume or replace it with a new one. In addition, you should apply grease to the gear
contacts and spring parts once every three months.
12
67
Advertisement
Table of Contents
