6-4
TURNING POWER ON - SOFTWARE INSTALLATION
3
• Remove urea (Resin Head) Screw, and then remove the DVD Case.
4
• Press the DVD Drive switch and the DVD Drive tray will open. Set the DVD ROM from
the DVD Software Kit into the Tray. Always have the DVD label facing upwards.
5
• Press the DVD Drive switch and the DVD Drive tray will close
6
• Reset Power, Turn the MAIN POWER Switch OFF, wait a while and then turn it back
on again.
7
• The Software installs Automatically from the DVD ROM to the LINDBURGH, In some
cases, it may take upto 0 minutes for the installation to the LINDBURGH to be com-
plete.
8
- Fig 0
- Fig 0