Test Mode - Sega -RaceTV Owner's Manual

9 TEST MODE
Perform periodic tests and data checks using the TEST and SERVICE buttons inside the cabinet. Follow
the instructions in this chapter to conduct checks when the game machine is first installed, when
money is being collected, or when the game machine does not operate properly.
Shown below are the tests and screens to be used for different problems.
This product uses a LINDBERGH game board and a DVD DRIVE. In the system, a different game can be
played by putting a different DVD ROM in the DVD DRIVE.
For this reason, the product' s Test Mode consists of two modes: a System Test Mode for systems in
which coin settings, for instance, are made for products that use the same system, and the Game Test
Mode for setting of difficulty level, etc., and for input/output test of operational units used exclusively
with this product.
 TABLE 0 EXPLANATION OF TEST MODE
ITEMS
INSTALLATION OF MACHINE
PERIODIC SERVICING
CONTROL SYSTEM
MONITOR
IC BOARD
DATA CHECK
NOTE: "S/M" in the table denotes LINDBERGH service manual, which is provided separately.
DESCRIPTION
. Check to ensure each is the standard
setting at shipment.
. Check each Input equipment in the
INPUT TEST mode.
. Check each Output equipment in the
OUTPUT TEST mode.
Periodically perform the following:
. Ascertain each setting.
. To test each Input equipment in the
INPUT TEST mode.
. To test each Output equipment in
the OUTPUT TEST mode.
. To check each Input equipment in
the INPUT TEST mode.
. Adjust or replace each Input
equipment.
In the Monitor Adjustment mode, check
to see if Monitor (Projector) adjustments
are appropriate.
. Information Display Screen
. SPEAKER TEST
Check such data as game play time and
histogram to adjust the difficulty level,
etc.
REFERENCE
SECTIONS
S/M Chapter 
S/M Chapter ,
-, --, --
S/M Chapter ,
-, --
S/M Chapter ,
-, --, --,
--
S/M Chapter ,
-, --, --
S/M Chapter ,
-, --
S/M Chapter ,
-, --, --
Chapter 0, , 
S/M Chapter ,
-, 
S/M Chapter 
S/M Chapter 
--7
9
43