MATRIX
SHOW IMP = 01
•
Pressing TEST will cycle through the LED Matrix animations & messages.
6. INPUT TEST
o
Switch Inputs
DIL SW1-6 000000
TST–OFF SRV-OFF
•
The current status of all on-board DIL inputs is shown on the display.
The current status of the TEST & SERVICE inputs is show on row 2 of the LCD display.
An audio sample will be played whenever an input state changes.
•
To exit from Switch Test, press the TEST and SERVICE buttons simultaneously.
o
Controllers TEST
CONTROLLERS
BOP IT: OFF
•
The current status of the BOP IT control is shown.
•
An audio sample will be played whenever an input state changes.
•
Press the SERVICE button to exit from this test.
CONTROLLERS
FLICK IT: OFF
•
The current status of the TWIST IT control is shown.
An audio sample will be played whenever an input state changes.
•
•
Press the SERVICE button to exit from this test.
***This is repeated for the remaining controllers - , Pull It, Twist It & Spin It.
Opto Input Test
o
INPUT TEST
OPTO INPUTS
The state of the Ticket Opto signal is displayed. The state of the input is changed as
•
a ticket passes through the opto.
7. OUTPUT TEST
"0" indicates a switch is OFF.
•
•
"1" indicates a switch is ON
9
47