2.Test Mode Precautions - Sega Derby Owners Club World Edition Service Manual

Hide thumbs Also See for Derby Owners Club World Edition:
Table of Contents

Advertisement

2. TEST MODE PRECAUTIONS
Never touch any areas of the machine other than those specified when
using the Test/Check Mode of the satellite. Touching such areas can
cause electric shock and short circuit accidents.
Since the service door of the satellite
closes due to its own weight, be careful
not to pinch/injure hands or fingers.
● When any one of the communicating satellites enters Test Mode,
game play is locked out at all of the other satellites. When the main
projection unit enters Test Mode, game play is locked out at all of the
satellites. Game play in progress is discontinued, and fractional coin
and bonus adder data is erased. For this reason, do not enter Test
Mode when other seats are being used for play. This product is
equipped with a Check Mode for cases where input/output tests and
card reader/writer checks must be performed while other seats are
being used for play. (Chapter 5)
● After using Test Mode, turn the power off and on again for the main
projection unit and all satellites.
● After the network check is complete and before the advertising screen
displays, do not operate any buttons or switches or insert coins. These
actions may lead to malfunctions.
● When settings have been changed in Test Mode, select EXIT from the
menu screen to exit Test Mode. Setting changes will not take effect
unless Test Mode has been exited properly.
● The left and right speakers on the main projection unit will always
output sound during the advertising sequence. Sound output during
the advertising sequence when sound has been turned OFF in Test
Mode does not indicate a malfunction. Note that satellites do not
output sound during the advertising sequence.
● This product cannot be used if coin settings and the number of
connected satellite seats has not been properly set.
● To enter Check Mode, press the CHECK Button during the advertising
sequence any time the ability level explanation screen is not being
displayed. The machine will not enter Check Mode if the CHECK
Button is pressed while the ability level explanation screen is being
displayed.
− 11 −

Advertisement

Table of Contents
loading

Table of Contents