Game Test Mode; Game Settings - Sega bop it ARCADE Quick Start Manual

9-2 GAME TEST MODE

TEST MODE
Test Mode is entered by pressing the TEST button. The cabinet LED Matrix will display the word "test "
TEST FUNCTIONS
NOTE:
The term 'CALL' and 'CALL OUT' used within these instructions refer to the vocal instructions to action the BOP
IT - TWIST IT - FLICK IT - PULL IT - SPIN IT controllers.

1. GAME SETTINGS

o Set Cost Of Play
SET COST OF PLAY
SETTING: 1.00
This function only sets Cost of Play.

To change to cost of play to the Player, the Credit Board settings should be used.

Pressing the TEST button will cycle through the following values:

o Set COIN Pulse.
COIN 1
SETTING: 1
This sets how many Credit pulses required to start the game.

Range 0 - 10

COIN 2
SETTING: 0
This pulse is equal to the cost of the game. Use as a multiplier for credits.

Range 0 - 10

BILL VALIDATOR
SETTING: 0
This pulse is equal to the cost of the game. Use as a multiplier for credits.

Range 0 – 10

****For cabinets fitted with an Excel Credit Board Set Coin 1 = 1, Coin 2 = 0****
Set Ticket Value
o
• FREEPLAY, 0.05, 0.10, ....... 4.90, 4.95, 5.00 (Increments of 0.05)
SET TO – 0 for cabinets fitted with the EXCEL
SET TO – 0 for cabinets fitted with the EXCEL
Credit Board.
Credit Board.
9
35