Section 7 - General Specifications & Operator Maintenance; Introduction; Operating Specifications; Operating Specifications - JLG EC600SJ Operation And Safety Manual

7.1

INTRODUCTION

This section of the manual provides additional necessary infor-
mation to the operator for proper operation and maintenance of
this machine.
The maintenance portion of this section is intended as informa-
tion to assist the machine operator to perform daily maintenance
tasks only, and does not replace the more thorough Preventive
Maintenance and Inspection Schedule included in the Service
and Maintenance Manual.
Other Publications Available:
Service and Maintenance Manual .......................................... 31215028
Illustrated Parts Manual ............................................................. 31215029
31215027
SECTION 7 - GENERAL SPECIFICATIONS & OPERATOR MAINTENANCE
SECTION 7. GENERAL SPECIFICATIONS & OPERATOR MAINTENANCE
7.2

OPERATING SPECIFICATIONS

Table 7-1. Operating Specifications
Maximum Work Load (Capacity)
ANSI Markets
Unrestricted:
Maximum Work Load (Capacity)
CE & Australia Markets
Unrestricted:
Maximum Operating Slope
EC600SJP/H600SJP
EC600SJ/H600SJ
Maximum Travel Grade (Gradeability)
Maximum Travel Grade (Side Slope)
EC600SJP/H600SJP
EC600SJ/H600SJ
Maximum Vertical Platform Height:
Maximum Horizontal Platform Reach
EC600SJP/H600SJP
EC600SJ/H600SJ
500 lb (227 kg)
500 lb (230 kg)
3°
4°
30%
3°
4°
60 ft. (18.29 m)
43 ft. (13.11 m)
42 ft. 9 in. (13.11 m)
7-1