Table of Contents
Advertisement
4.3
MOTOR OPERATION
Power/Emergency Stop
This red, mushroom-shaped switch provides
battery power, when pulled out (On), for all
machine functions. The switch should be
pushed in (Off ) when recharging the batteries
or parking the machine overnight.
Platform/Ground Select Switch
The Platform/Ground Select switch functions to
direct battery power to the desired control station
when the Power/Emergency Stop switch is pulled
out (on). With the switch in the Ground position,
battery power is supplied to the ground control
station. When the switch is in the Platform position,
battery power is supplied to the platform control station.
31215027
SECTION 4 - MACHINE OPERATION
4.4
TRAVELING (DRIVING)
NOTE:
When the upper boom is raised approximately 11 degrees above
horizontal, the high drive function will automatically be in low
drive.
DO NOT DRIVE THE MEWP OUT OF TRANSPORT MODE EXCEPT ON A SMOOTH, FIRM
SURFACE WITHIN THE LIMITS OF THE MAXIMUM OPERATING SLOPE.
TO AVOID LOSS OF TRAVEL CONTROL OR TIP OVER, DO NOT DRIVE MACHINE ON
GRADES EXCEEDING THOSE SPECIFIED IN THE OPERATING SPECIFICATIONS SECTION
OF THIS MANUAL.
DO NOT DRIVE ON SIDESLOPES WHICH EXCEED 4 DEGREES.
USE EXTREME CAUTION WHEN DRIVING IN REVERSE AND AT ALL TIMES WHEN DRIV-
ING WITH THE PLATFORM ELEVATED.
BEFORE DRIVING, LOCATE THE BLACK/WHITE ORIENTATION ARROWS ON BOTH THE
CHASSIS AND THE PLATFORM CONTROLS. MOVE THE DRIVE CONTROLS IN A DIREC-
TION MATCHING THE DIRECTIONAL ARROWS FOR THE INTENDED DIRECTION OF
TRAVEL.
4-5
Advertisement
Table of Contents
