Traveling Forward And Reverse - JLG EC600SJ Operation And Safety Manual

Traveling Forward and Reverse

1.
At Platform Controls, pull out Emergency Stop
switch and activate footswitch.
2.
Position Drive controller to Forward or
Reverse as desired.
This machine is equipped with a Drive Orientation Indicator. The
yellow light on the platform control console indicates that the
boom is swung beyond the rear drive tires and the machine may
Drive/Steer in the opposite direction from the movement of the
controls. If the indicator is illuminated, operate the Drive function
in the following manner:
31215027
SECTION 4 - MACHINE OPERATION
1. Match the black and white
direction arrows on both plat-
form control panel and the
chassis to determine the direc-
tion the machine will travel.
2.
Push and release the Drive Orientation Over-
ride switch. Within 3 seconds, slowly move the
Drive control toward the arrow matching the
intended direction of machine travel. The indi-
cator light will flash during the 3 second inter-
val until the drive function is selected.
4-7