Table of Contents
Advertisement
SECTION 3 - MACHINE CONTROLS AND INDICATORS
4.
Jib Lift (If Equipped)
Provides raising and lowering of the jib.
5.
Boom Lift
Provides for raising and lowering of the
Boom.
NOTE:
Refer to the Service Manual for the generator fault codes.
6.
Generator/Engine Start Button (if equipped)
The generator/engine start push-button switch
allows the generator to be started manually to
top-off the battery charge. The generator will start automat-
ically when the batteries reach a low-charge level.
3-4
7.
Power/Emergency Stop
A two-position red mushroom shaped switch
furnishes power to Platform/Ground Select
switch when pulled out (on). When pushed in
(off ), power is shut off to the Platform/Ground Select switch.
8.
Generator Enabled Indicator
The generator enabled indicator lights to sig-
nify the generator is enabled and may start at
any time as the batteries require. If the indicator flashes, it
signifies an abnormal condition for the generator engine
(high oil temperature or low oil pressure) or, on all electric
machines, an electrical system fault.
9.
Platform/Ground Select
A three position, key operated switch supplies
power to the platform control console when
positioned to Platform. With the switch key
held in the Ground position, power is shut off to platform
and only ground controls are operable.
NOTE:
With Platform/Ground Select switch in the center position,
power is shut off to controls at both operating stations.
A
31215027
Advertisement
Table of Contents
