Table of Contents
Advertisement
Pre-Start Inspection
The Pre-Start Inspection should include each of the following:
1.
Cleanliness – Check all surfaces for leakage (oil, fuel, or bat-
tery fluid) or foreign objects. Report any leakage to the
proper maintenance personnel.
2.
Structure - Inspect the machine structure for dents, dam-
age, weld or parent metal cracks or other discrepancies.
Parent Metal Crack
3.
Decals and Placards – Check all for cleanliness and legibil-
ity. Make sure none of the decals and placards are missing.
Make sure all illegible decals and placards are cleaned or
replaced.
4.
Operation and Safety Manuals – Make sure a copy of the
Operation and Safety Manual, is enclosed in the weather
resistant storage container.
5.
Walk-Around Inspection – Perform as instructed.
6.
Battery – Charge as required.
31215027
SECTION 2 - USER RESPONSIBILITIES, MACHINE PREPARATION, AND INSPECTION
Weld Crack
7.
Fuel (Combustion Engine Powered Machines) – Add the
proper fuel as necessary.
8.
Hydraulic Oil – Check the hydraulic oil level. Ensure hydrau-
lic oil is added as required.
9.
Accessories/Attachments - Refer to the Accessories section
in this manual or the accessory installed upon the machine
for specific inspection, operation, and maintenance instruc-
tions.
10.
Function Check – Once the Walk-Around Inspection is com-
plete, perform a functional check of all systems in an area
free of overhead and ground level obstructions. Refer to Sec-
tion 4 for more specific operating instructions.
11.
Platform Gate – Keep gate and surrounding area clean and
unobstructed. Verify the gate closes properly and is not bent
or damaged. Keep gate closed at all times except when
entering/exiting the platform and loading/unloading mate-
rials.
12.
Lanyard Attach Points – During operation, occupants in the
platform must wear a full body harness with a lanyard
attached to an authorized lanyard anchorage point. Attach
only one (1) lanyard per lanyard anchorage point
IF THE MACHINE DOES NOT OPERATE PROPERLY, TURN OFF THE MACHINE IMMEDI-
ATELY! REPORT THE PROBLEM TO THE PROPER MAINTENANCE PERSONNEL. DO NOT
OPERATE THE MACHINE UNTIL IT IS DECLARED SAFE FOR OPERATION.
2-7
Advertisement
Table of Contents
