Section 7 - General Specifications & Operator Maintenance; Introduction; Operating Specifications And Performance; Data - JLG 450A Operation And Safety Manual

7.1

INTRODUCTION

This section of the manual provides additional necessary infor-
mation to the operator for proper operation and maintenance of
this machine.
The maintenance portion of this section is intended as informa-
tion to assist the machine operator to perform daily maintenance
tasks only, and does not replace the more thorough Preventive
Maintenance and Inspection Schedule included in the Service
and Maintenance Manual.
Other Publications Available:
Service and Maintenance Manual .............................................3121659
Illustrated Parts Manual ................................................................3121660
3121658
SECTION 7 - GENERAL SPECIFICATIONS & OPERATOR MAINTENANCE
SECTION 7. GENERAL SPECIFICATIONS & OPERATOR MAINTENANCE
7.2

OPERATING SPECIFICATIONS AND PERFORMANCE

DATA

Operating Specifications

Table 7-1. Operating Specifications
Capacity: Unrestricted:
Maximum Travel Grade, stowed
Position (Gradeability)
Maximum Travel Grade, stowed
Position (Side Slope)
Drive Speed - Stowed
Gross Machine Weight - Approximate
Maximum Ground Bearing Pressure
Max. Tire Load
System Voltage
Maximum Main Relief Hyd. Pressure
Average Fuel Consumption
550 lbs. (249.5 kg)
45%
5°
4.25 mph (6.8 kph)
13,250 lbs. (6010 kg)
2
65 psi (4.6 kg/cm )
7200 lbs. (3266 kg)
12V DC
4060 psi (280 Bar)
0.85 gph (3.2 lph)
7-1