Table of Contents
Advertisement
4.1
DESCRIPTION
This machine is a mobile elevating work platform used to posi-
tion personnel, along with their necessary tools and materials at
work locations.
The primary operator control console is in the platform. From this
control console, the operator can drive and steer the machine in
both forward and reverse directions. The operator can raise or
lower the boom or swing the boom to the left or right. Standard
boom swing is 400 degree non-continuous. The machine has a
Ground Control Console which will override the Platform Control
Station. Ground Controls operate all functions except drive and
steer. Except for performing inspections and the Function Check,
the ground controls are to be used in an emergency to lower the
platform to the ground should the operator in the platform be
unable to do so.
31215027
SECTION 4. MACHINE OPERATION
4.2
Capacities
The boom can be raised above horizontal with or without any
load in platform, if:
1.
2.
3.
4.
SECTION 4 - MACHINE OPERATION
OPERATING CHARACTERISTICS AND LIMITATIONS
Machine is positioned on a smooth, firm surface within the
limits of the maximum operating slope.
Load is within manufacturer's rated capacity.
All machine systems are functioning properly.
Machine is as originally equipped from JLG.
4-1
Advertisement
Table of Contents
