Table of Contents
Advertisement
SECTION 7 - GENERAL SPECIFICATIONS & OPERATOR MAINTENANCE
7.3
OPERATOR MAINTENANCE
NOTE:
The following numbers correspond to those in Figure 7-4., Oper-
ator Maintenance and Lubrication Diagram.
Table 7-10. Lubrication Specifications.
KEY
SPECIFICATIONS
MPG
Multipurpose Grease having a minimum dripping point of 350 degrees F.
Excellent water resistance and adhesive qualities; and being of extreme
pressure type (Timken OK 40 pounds minimum).
EPGL
Extreme Pressure Gear Lube (oil) meeting API Service Classification GL-5
or Mil-Spec Mil-L-2105.
HO
Hydraulic Oil. Mobil DTE-11M
OG*
Open Gear Lube - Tribol Molub-Alloy 936 Open Gear Compound. (JLG
Part No. 3020027)
BG*
Bearing Grease (JLG Part No. 3020029) Mobilith SHA 460.
LL
Synthetic Lithium Lubricant, Gredag 741 Grease. (JLG Part No. 3020022)
EO
Engine (crankcase) Oil. Gas - API SF/SG class, MIL-L-2104. Diesel - API CC/
CD class, MIL-L-2104B/MIL-L-2104C.
*MPG may be substituted for these lubricants, if necessary, but
service intervals will be reduced.
7-10
LUBRICATION INTERVALS ARE BASED ON MACHINE OPERATION UNDER NORMAL
CONDITIONS. FOR MACHINES USED IN MULTI-SHIFT OPERATIONS AND/OR EXPOSED
TO HOSTILE ENVIRONMENTS OR CONDITIONS, LUBRICATION FREQUENCIES MUST BE
INCREASED ACCORDINGLY.
NOTE:
It is recommended as a good practice to replace all filters at the
same time.
1.
Swing Bearing - Internal Ball Bearing
Lube Point(s) - 1 Grease Fittings
Capacity - A/R
Lube - MPG
Interval - Every 3 months or 150 hrs of operation
31215027
Advertisement
Table of Contents
