Table of Contents
Advertisement
SECTION 3 - MACHINE CONTROLS AND INDICATORS
4.
Power/Emergency Stop
A two-position red mushroom shaped switch
furnishes power to Platform Controls when
pulled out (on). When pushed in (off ), power is
shut off to the platform functions.
Within about 2 seconds of pulling the switch out, the
machine will perform a diagnostic check of the various elec-
trical circuits, and if everything is OK, the platform alarm will
beep once. During this time the lights on the indicator panel
will also blink once as a bulb check.
TO AVOID SERIOUS INJURY, DO NOT OPERATE MACHINE IF ANY CONTROL LEVERS OR
TOGGLE SWITCHES CONTROLLING PLATFORM MOVEMENT DO NOT RETURN TO THE
OFF OR NEUTRAL POSITION WHEN RELEASED.
5.
Generator Enable Control (if equipped)
This switch allows the operator to prevent the
generator engine from starting to charge the
batteries when using the machine indoors.
3-8
6.
Drive Orientation Override
When the boom is swung over the rear tires
or further in either direction, the Drive Orien-
tation indicator will illuminate when the drive
function is selected. Push and release the
switch, and within 3 seconds move the Drive/Steer control
to activate drive or steer. Before driving, locate the black/
white orientation arrows on both the chassis and the plat-
form controls and match the control direction arrow to the
intended chassis direction.
7.
Drive/Steer
The Drive joystick provides for
driving either forward or back-
ward. The controller is 'ramped' to
allow variable drive speed.
Steering is controlled by a thumb
operated switch on top of the joystick.
A
8.
Telescope Control
Provides extension and retraction of the main
boom.
31215027
Advertisement
Table of Contents
