Section 7 - General Specifications & Operator Maintenance; Introduction; Operating Specifications; Operating Specifications - 400Sc - JLG 400SC Operation And Safety Manual

7.1

INTRODUCTION

This section of the manual provides additional necessary infor-
mation to the operator for proper operation and maintenance of
this machine.
The maintenance portion of this section is intended as informa-
tion to assist the machine operator to perform daily maintenance
tasks only, and does not replace the more thorough Preventive
Maintenance and Inspection Schedule included in the Service
and Maintenance Manual.
Other Publications Available:
Service and Maintenance Manual .......................................... 31215019
Illustrated Parts Manual ............................................................. 31215020
31215018
SECTION 7 - GENERAL SPECIFICATIONS & OPERATOR MAINTENANCE
SECTION 7. GENERAL SPECIFICATIONS & OPERATOR MAINTENANCE
7.2

OPERATING SPECIFICATIONS

Table 7-1. Operating Specifications - 400SC
Maximum Work Load (Capacity):
Unrestricted
Restricted
Maximum Operating Slope
Maximum Travel Grade, Stowed Position (Gradeability)
Maximum Travel Grade, Stowed Position (Side Slope)
Platform Height:
Horizontal Platform Reach:
Turning Radius (Outside)
Turning Radius (Inside)
Overall Width
Stowed Height:
Stowed Length
Wheelbase
Ground Clearance
272 kg (600 lb)
454 kg (1000 lb)
5°
51%
5°
12.05 m (39 ft-6.5 in)
10 m (33 ft)
0
0
2.23 m (7 ft-4 in)
2.32 m (7 ft-7.5 in ft)
7.57 m (24ft-10 in)
2.25 m (7 ft-4.8 in)
0.41 m (16 in)
7-1