Table of Contents
Advertisement
3.
Rotate the cover to show the inside diameter
4.
Install the bolts and torque 6.3 ft. lb (8.8 Nm) until they are
flush with the cover.
5.
The machine is ready to be towed.
31215027
BEFORE THE MACHINE IS SEPARATED FROM THE TOWING VEHICLE, EITHER THE DRIVE
HUB HAS TO BE REENGAGED OR PROPER STEPS MUST BE TAKEN TO PREVENT THE
MACHINE FROM MOVING.
Engaging after Towing is Complete
COVER
ROTATED
SECTION 4 - MACHINE OPERATION
THE COVER IS UNDER SPRING FORCE
1.
Remove the 2 hex head bolts securing the cover evenly and
remove the cover.
2.
Rotate the cover 180 degrees and secure with the two hex
head bolts.
3.
Torque the hex head bolts 6.3 ft. lb. (8.8 Nm).
4.
The gear drive should now be reengaged and the machine
can be disconnected from the towing vehicle.
4-19
Advertisement
Table of Contents
