Table of Contents
Advertisement
5.6
MACHINE SAFETY SYSTEM OVERRIDE (MSSO)
(CE ONLY)
The Machine Safety System Override (MSSO) is
only to be used to retrieve an operator that is
pinned, trapped, or unable to operate the
machine and function controls are locked out
from the platform due to a platform overload sit-
uation.
NOTE:
If the MSSO functionality is used, a fault code is set in the JLG
Control System which must be reset by a qualified JLG Service
Technician.
NOTE:
No functional checks of the MSSO system are necessary. The JLG
Control system will set a Diagnostic Trouble Code if the control
switch is faulty.
To operate the MSSO:
1.
From the ground control console, place the Platform/
Ground Select switch in the Ground position.
2.
Pull out the Power/Emergency Stop control.
3.
Start the engine.
4.
Press and hold the MSSO switch and the control switch for
the desired function.
31215027
SECTION 5 - EMERGENCY PROCEDURES
5-7
Advertisement
Table of Contents
