General - JLG EC600SJ Operation And Safety Manual

GENERAL

Begin your Walk-Around Inspection at item 1, as noted on the
diagram. Continue to your right (counterclockwise viewed from
the top) checking each item in sequence for the conditions listed
in the following checklist.
TO AVOID POSSIBLE INJURY, BE SURE MACHINE POWER IS OFF. DO NOT OPERATE
MACHINE UNTIL ALL MALFUNCTIONS HAVE BEEN CORRECTED.
DO NOT OVERLOOK VISUAL INSPECTION OF CHASSIS UNDERSIDE. CHECKING THIS
AREA MAY RESULT IN DISCOVERY OF CONDITIONS WHICH COULD CAUSE EXTENSIVE
MACHINE DAMAGE.
INSPECTION NOTE: On all components, make sure there are no
loose or missing parts, that they are securely fastened, and no visible
damage, leaks or excessive wear exists in addition to any other crite-
ria mentioned.
1. Platform Assembly and Gate - Footswitch works properly,
not modified, disabled or blocked. Gate latches and hinges
in working condition.
2. SkyGuard - See Inspection Note.
31215027
SECTION 2 - USER RESPONSIBILITIES, MACHINE PREPARATION, AND INSPECTION
3. Platform Control Console - Switches and levers return to
neutral when activated and released, decals/placards secure
and legible, control markings legible.
4. Platform Rotator - See Inspection Note.
5. All Hydraulic Cylinders - No visible damage; pivot pins and
hydraulic hoses undamaged, not leaking.
6. Boom Sections/Uprights/Turntable - See Inspection Note.
7. Drive Axle and Motor - See Inspection Note.
8. Wheel/Tire Assemblies - Properly secured, no missing lug
nuts. Inspect for worn tread, cuts, tears or other discrepan-
cies. Inspect wheels for damage and corrosion.
9. Drive Brake and Hub - No evidence of leakage.
10. Frame - See Inspection Note.
11. Hood Assemblies - See Inspection Note.
12. Hydraulic Pump and Reservoir - See Inspection Note.
13. Manual Descent Valve - See Inspection Note.
14. Generator Start Battery - See Inspection Note.
15. Battery Compartment - Batteries have proper electrolyte
level; cables tight; no visible damage or corrosion.
16. Counterweight - No evidence of damage.
2-9