Section 8 - General Specifications & Operator Maintenance; Introduction; Operating Specifications And Performance Data; Operating Specifications - JLG 1500SJ Operation And Safety Manual

8.1

INTRODUCTION

This section of the manual provides additional necessary infor-
mation to the operator for proper operation and maintenance of
this machine.
The maintenance portion of this section is intended as informa-
tion to assist the machine operator to perform daily maintenance
tasks only, and does not replace the more thorough Preventive
Maintenance and Inspection Schedule included in the Service
and Maintenance Manual.
Other Publications Available:
Service and Maintenance Manual .............................................3121262
Illustrated Parts Manual ................................................................3121263
3121261
SECTION 8 - GENERAL SPECIFICATIONS & OPERATOR MAINTENANCE
SECTION 8. GENERAL SPECIFICATIONS & OPERATOR MAINTENANCE
8.2 OPERATING SPECIFICATIONS AND PERFORMANCE
DATA

Operating Specifications

Table 8-1. Operating Specifications
Capacity - ANSI
Unrestricted
Restricted
Capacity - CE & Australia
Unrestricted
Restricted
Maximum Travel Grade, stowed
Position (Gradeability) see Figure 4-3.
Maximum Travel Grade, stowed
Position (Side Slope) see Figure 4-3.
Maximum Drive Speed
Gross Machine Weight - Approximate
Ground Bearing Pressure - Maximum
– JLG Lift –
500 lbs (227 kg)
1000 lbs (454 kg)
500 lbs (230 kg)
1000 lbs (450 kg)
40%
5°
3.0 mph (4.8 kph)
48000 lbs. (21772 kg)
2
113 psi (7.94 kgcm )
8-1