Section 7 - General Specifications & Operator Maintenance; Introduction; Operating Specifications; Operating Specifications - JLG E450AJ Operation And Safety Manual

7.1

INTRODUCTION

This section of the manual provides additional necessary infor-
mation to the operator for proper operation and maintenance of
this machine.
The maintenance portion of this section is intended as informa-
tion to assist the machine operator to perform daily maintenance
tasks only, and does not replace the more thorough Preventive
Maintenance and Inspection Schedule included in the Service
and Maintenance Manual.
Other Publications Available:
Service and Maintenance Manual .......................................... 31215013
Illustrated Parts Manual ............................................................. 31215014
31215012
SECTION 7 - GENERAL SPECIFICATIONS & OPERATOR MAINTENANCE
SECTION 7. GENERAL SPECIFICATIONS & OPERATOR MAINTENANCE
7.2

OPERATING SPECIFICATIONS

Table 7-1. Operating Specifications
Maximum Work Load (Capacity)
ANSI Markets
Unrestricted:
Maximum Work Load (Capacity)
CE & Australia Markets
Unrestricted:
Travel Speed
Maximum Operating Slope:
Maximum Travel Grade (Gradeability)
Maximum Travel Grade (Side Slope)
Maximum Height: (stowed)
Maximum Horizontal Platform Reach
Turning Radius (Curb to Curb)
Turning Radius (inside)
Maximum Wind Speed
Maximum Tire Load:
Ground Bearing Pressure
500 lb (227 kg)
500 lb (230 kg)
3.2 mph (5.2 km/h)
3°
30%
3°
6 ft. 7 in. (2.0 m)
23 ft. 9 in. (7.24 m)
15 ft. 3 in. (4.65 m)
2 ft. (0.61 m)
28 mph (12.5 m/s)
6900 lb (3,130 kg)
2
75 psi (5.2 kg/cm )
7-1