Section 7 - General Specifications & Operator Maintenance; Introduction; Operating Specifications; Operating Specifications - JLG 600S Operation And Safety Manual

7.1

INTRODUCTION

This section of the manual provides additional necessary infor-
mation to the operator for proper operation and maintenance of
this machine.
The maintenance portion of this section is intended as informa-
tion to assist the machine operator to perform daily maintenance
tasks only, and does not replace the more thorough Preventive
Maintenance and Inspection Schedule included in the Service
and Maintenance Manual.
Other Publications Available:
Service and Maintenance Manual .......................................... 31215034
Illustrated Parts Manual ............................................................. 31215035
31215033
SECTION 7 - GENERAL SPECIFICATIONS & OPERATOR MAINTENANCE
SECTION 7. GENERAL SPECIFICATIONS & OPERATOR MAINTENANCE
7.2

OPERATING SPECIFICATIONS

Table 7-1. Operating Specifications
Maximum Work Load (Capacity) -600S*
Unrestricted:
Restricted:
Maximum Work Load (Capacity) -660SJ*
Unrestricted:
Restricted:
Maximum Operating Slope
Maximum Travel Grade (Gradeability)- 4WD
Maximum Travel Grade (Side Slope)
Maximum Manual Force (600S)
Maximum Manual Force (660SJ)
Maximum Wind Speed
Maximum Tire Load:
600S
660SJ
Ground Bearing Pressure - 600S
Foam-Filled
Pneumatic
600 lb (272 kg)
1000 lb (454 kg)
550 lb (250 kg)
750 lb (340 kg)
5°
45%
5°
90 lbs. (400 N)
100 lbs. (445 N)
28 mph (12.5 m/s)
12760 lbs. (5788kg)
14720 lbs. (6677kg)
2
83.1 psi (5.84 kg/cm )
2
77.7 psi (5.46 kg/cm )
7-1