Set Key Sequence Id; Set Key Sequence Header; Set Key Sequence Terminator - Datalogic PowerScan PD96 Series Product Reference Manual

ENTER/EXIT PROGRAMMING MODE

Set Key Sequence ID

Sets the identifier for keyboard composed strings.
Set keys sequence ID
$CPWEC

Set Key Sequence Header

Sets the header for keyboard composed strings.
Set key sequence header
$CPWE1

Set Key Sequence Terminator

Sets the terminator for keyboard composed strings.
Set key sequence terminator
$CPWE2
244
POWERSCAN™ PD/PM96XX
DISPLAY AND KEYBOARD FEATURES
To configure this feature, scan the ENTER/EXIT PRO-
GRAMMING MODE bar code above, then the bar code
at left followed by 6 digits from
The ID characters must be represented by their
hexadecimal ASCII code; if the first 2 digits are 0, this
feature is disabled. End by scanning the ENTER/EXIT
bar code again.
To configure this feature, scan the ENTER/EXIT PRO-
GRAMMING MODE bar code above, then the bar code
at left followed by 32 digits from the Alphanumeric
characters in Appendix D,
be the hexadecimal ASCII representation of the
desired characters.
If less than the expected string of 16 characters are
selected, scan the ENTER/EXIT bar code to terminate
the string.
If the first 2 digits are 0, the feature is disabled. End
by scanning the ENTER/EXIT bar code again.
To configure this feature, scan the ENTER/EXIT PRO-
GRAMMING MODE bar code above, then the bar code
at left followed by 32 digits from the Alphanumeric
characters in Appendix D,
be the hexadecimal ASCII representation of the
desired characters.
If less than the expected string of 16 characters are
selected, scan the ENTER/EXIT bar code to terminate
the string.
If the first 2 digits are 0, the feature is disabled. End
by scanning the ENTER/EXIT bar code again.
Appendix D, Keypad.
Keypad. The digits must
Keypad. The digits must