Customizing Configuration Settings; Using The Programming Bar Codes; Datalogic Aladdin™ Utility; Interface Settings - Datalogic Quickscan QD2200 Product Reference Manual

SETUP

CUSTOMIZING CONFIGURATION SETTINGS

Using the Programming Bar Codes

This manual contains feature descriptions and bar codes which allow you to reconfigure
your scanner. Some programming bar code labels, like
tion to Defaults, starting on page 12
change.
Most of the programming labels in this manual, however, require the scanner to be
placed in Programming Mode prior to scanning them. Scan an ENTER/EXIT bar code
once to enter Programming Mode. Once the scanner is in Programming Mode, you can
scan a number of parameter settings before scanning the ENTER/EXIT bar code a second
time, which will then accept your changes, exit Programming Mode and return the
scanner to normal operation.
Datalogic Aladdin™ Utility
Programming can alternatively be performed using the Datalogic Aladdin™ Configura-
tion application which is available for free download from the Datalogic website listed
on the back cover of this manual. This multi-platform utility program allows device con-
figuration using a PC. It communicates to the device using a USB cable and can also cre-
ate configuration bar codes to print.
Datalogic Aladdin™ is a multi-platform utility program providing a quick and user-
friendly configuration method via the USB-COM interface. The Aladdin utility is avail-
able on the Datalogic website. Aladdin allows you to program the scanner by selecting
configuration commands through a user-friendly graphical interface running on a PC.
These commands are sent to the scanner over the selected communication interface, or
they can be printed as bar codes to be scanned.
Aladdin also provides the ability to perform a software upgrade for the connected
device (see the Datalogic Aladdin™ Help On-Line for more details).

Interface Settings

The scanner is typically factory-configured with a set of default features standard to the
interface type you ordered. See
Global Interface Features, starting on
face types. If your installation requires you to further customize your scanner, you can
select other options through use of the instructions and programming bar codes avail-
able in the appropriate section for your interface.
•
•
•
11
QUICKSCAN™ I QD2200
NOTE: There are some exceptions to the typical programming sequence
described above. Please read the description and setting instructions care-
fully when configuring each given programmable feature.
USB-COM INTERFACE on
KEYBOARD INTERFACE on
USB-OEM INTERFACE on
, require only the scan of that single label to enact the
Appendix B, Standard Defaults
provides settings configurable by all inter-
page 16
page 1
page 9
page 36
Resetting the Product Configura-
.