Configure Actions For Function Keys - Datalogic PowerScan 9500 Series Product Reference Manual

CONFIGURE ACTIONS FOR FUNCTION KEYS

Each of the function keys can be programmed to perform a user-assigned
function. This is done by associating a function key with either a predefined
command or your own custom string. See the
251command to define customized strings.
Each function key has an associated label which shows in the display when
active. The default labels are shown in the table below. To program the
function key labels, see
The following table shows the list of predefined commands and available
strings.
Table 26. Keyboard Programming
CMD_ID Name
0 Not configured
1 Enter CMD
2 String 1
3 String 2
4 String 3
5 String 4
6 String 5
7 Backlight CMD
8 Clear CMD
9
A
B Show Date/Time
C
Product Reference Guide
"Set String ID" on page
Function
No configured action.
If a key must be kept enabled but in normal mode isn't
required, this function can be selected to keep it inactive.
Whenever an unconfigured function key is pressed, an error
message appears on display and an error beep is emitted.
Same as ENTER_KEY.
Display and transmit string 1.
Display and transmit string 2.
Display and transmit string 3.
Display and transmit string 4.
Display and transmit string 5.
Toggle backlight on/off.
Clears the screen
Reserved for future use
Reserved for future use
Display the internal date, time.
Reserved for future use
Enter/Exit Programming Mode
"Define Strings" on page
252.
Default
Label
<None>
Ent
S1T
S2T
S3T
S4T
S5T
Blt
CLR
Tim
249