Configure Actions For Function Keys - Datalogic PowerScan PD96 Series Product Reference Manual

CONFIGURE ACTIONS FOR FUNCTION KEYS

Each of the function keys can be programmed to perform a user-assigned function. This
is done by associating a function key with either a predefined command or your own
custom string. See the "
strings.
Each function key has an associated label which shows in the display when active. The
default labels are shown in the table below. To program the function key labels, see "
String ID" on page 245
The following table shows the list of predefined commands and available strings.
Table 5 - Keyboard Programming
CMD_ID
00
01
02
03
04
05
06
07
08
09
0A
0B
0C
0D
0E
0F
10
230
POWERSCAN™ PD/PM96XX
Define Strings" on page 234
NAME
Not configured action.
If a key must be kept enabled but
isn't required in normal mode , this
function can be selected to keep it
Not configured
ineffective. Whenever an unconfig-
ured function key is pressed, an
error message appears on the dis-
play and an error beep is emitted.
Enter CMD Same as ENTER_KEY.
String 1 Display and transmit string 1.
String 2 Display and transmit string 2.
String 3 Display and transmit string 3.
String 4 Display and transmit string 4.
String 5 Display and transmit string 5.
Backlight CMD Toggle backlight on/off.
Clear CMD Clears the screen.
Backspace CMD Same as Backspace key.
If pressed once, it recalls the last
code sent out.
Recall
If pressed twice, resends the last
code.
Show Date/Time Display the internal date, time.
Scroll Up Scroll up display content by row.
Scroll Down Scroll down display content by row.
Dot char Display dot [.] char.
Dynamic Quantity Dynamic Quantity Code function.
Switch between numeric and
Shift action
alphanumeric mode
command to define customized
FUNCTION
Set
DEFAULT
16K 4K
LABEL
<None>
v