Date-Time Separator - Datalogic PowerScan 9500 Series Product Reference Manual

Date-Time Separator

Sets the character used to separate Date and Time from the next field in
message.
DEFAULT
$CRFTD01\r
Set Character Separator =
Make a mistake? Scan the CANCEL bar code to abort
and not save the entry string. You can then start
again at the beginning.
Product Reference Guide
Enter/Exit Programming Mode
$CRFTD0000\r
Disable Date-Time Separator
To configure this feature, scan the ENTER/EXIT PRO-
GRAMMING MODE bar code above, then the bar code at
left followed by 2 digits from the Alphanumeric characters
in Appendix D, Keypad
character(s). End by scanning the ENTER/EXIT bar code
again.
~
CANCEL
representing your desired
221