Date-Time Separator - Datalogic PowerScan PD9530 Product Reference Manual

Enter/Exit Programming Mode

Date-Time Separator

Sets the character used to separate Date and Time from the next field in
message.
DEFAULT
$CRFTD01\r
Set Character Separator =
Make a mistake? Scan the CANCEL bar code to abort
and not save the entry string. You can then start again
at the beginning.
222
$CRFTD0000\r
Disable Date-Time Separator
To configure this feature, scan the ENTER/EXIT PRO-
GRAMMING MODE bar code above, then the bar code at
left followed by 2 digits from the Alphanumeric charac-
Appendix D, Keypad
ters in
desired character(s). End by scanning the ENTER/EXIT
bar code again.
~
CANCEL
PowerScan™ PD9530/PBT9500/PM9500
representing your