abc 2000 Series User Manual page 98

PIO setti n g
PA, 0 0
Setti n g Range 3
PID dl a l t al settl n a
PA, 0 1 Setti n g Range 0. 0 %-100. 0 %
PA.00 is used to select the channel of target process P!D setting.
The PID setting is a relative value and ranges from 0.0% to 1 00.0%.
The PIO feedback is also a relative value. The purpose of PIO
control is to make the PIO setting and PID feedback the same.
PID feedback source
PA02
Setti n g Range
This parameter is used to select the feedback signal channel of
process PID.
The PIO feedback is a relative value and ranges from 0.0o/ o to
1 00.0%.
PIO acti o n di r ecti o n
PA. 0 3 Setti n g Range :�
0: Forward action
When the feedback value is smaller than the PIO setting, the AC
drive's output frequency rises. For example, the winding tension
control requires forward PID action.
1: Reverse action
When the feedback value is smaller than the PID setting, the AC
drive's output frequency reduces. For example, the unwinding
tension control requires reverse PID action. Note that this function
0
source
1
4
5
6
0
1
2
3
4
5
6
7
6
Detailed Function
Defaul t 10
PA, 0 1
FIV
FIC
Reserved
PULSE
Communi cat i o n setti n g
Mul ti m refersnce
Default
D aul
FIV
ef t
FIC
Reserved
FI V -FI C
PULSE setti n g
(S3)
Communi cat i o n setti n g
FI V +FI C
( I FIVl,I F ICI)
MAX
MIN (I F I V l , IFICI )
Forward acti o n
Default
Rever s e acti o n