Indicator Li Ght Descliptlons; Operational Process; Parameter Settings - abc 2000 Series User Manual

Key
@
Right shift Key
9
Run key
@
Stop key/Fault
resat key
3.1.3
Indicator light descriptions
Indicator Light Name
FWD/REV
3.2
Operational
3.2.1
Parameter Sett i ngs
three-level menu :
1 .The function code group (first menu);
2.Function code symbols (second menu);
3.Function code set value ( third menu).
Explanation: the three-level menu operation, can press PRG or
ENTIER to return to the secondary menu.The difference between
the two is: press ENTER to set parameters in control panel, and
then return to the secondary menu, and automatically move to the
next function code;Press PRG directly to return to the secondary
menu, don't store parameters, and keep staying in the current
function code.Example: change the function code P1 .03 from 00.00
Hz change the sample set to 50.00 Hz.
Name
Hz
A
v
process
Desaiption
In parameter setting mode, press this
button to select the bit to be
In other
modes,
parameters by right shift
Start to run the inverter in keypad
control mode.
In running status, nts!rictad by F7 .02,
can be used stop
to
When fault alann, can be used
to reset the inverter without any
rastr1ctlon.
Indicator Light Description
Frequency unit
Current unit
Voltage unit
Light off: forward operation.
Light on: reverse operation.
1
· 8 ·
modified.
cyclically displays
Iha
Inverter.