abc 2000 Series User Manual page 107

(Pb.09), the M01 terminal allocated with function 9 (Designated
count value reached} beoomes ON. Then the counter continues to
count until the sat count value is reached.
Pb.09 should be equal to or smaller than Pb.08.
Count pulses input
Count pulses iDput
reached output
tvalue
output
Fi g ure 4-27 the set count val u e reached and desi g nated count val u e
Group PC: Multi-Reference and Simple PLC Function
ABC-
The 2 000 multi-reference has more rich functions than multi­
speed. Besides multi-speed, it can be used as the setting source
of the V/F separated voltage source and setting source of process
PID. In addition, the multi-reference is relative value.
The simple PLC function is different from the
programmable function. Simple PLC can only complete simple
combination of multi-reference, while the user programmable
function is richer and more practical. For details, see the
descriptions of group PC.
PC.00 mul t i - reference 0 Defaul t I 0 .0%
Setti n g Range
PC.01 mul t i -re ference 1 Defaul t 1 0 .0%
Setti n g Range
PC. 0 2 mul t i - reference 2 Defaul t I 0 .0%
Setti n g Range
PC. 0 3 mul t i -r eference 3 Defaul t 1 0 .0%
Setti n g Range
PC. 0 4 multi - reference 4 Defaul t 1 0 .0%
PC. 0 5 multi - reference 5 Defaul t I 0 .0%
Setti n g Range
PC.06 mul t i -r eference
1 2 3
---;- -- -;-�n_
Pb.09=11
D0.12=11
Defaul t 1 0 .0%
6
101112 192021
Pb.08=20 !-:
-100.0%-100.0%
-100.0%-100.0%
-100.0%-100.0%
-100.0% .... 100.0%
-100.0%-100.0%
-100.0%-100.0%
-100.0%-100.0%
02
1
· ·
�
!
D0.12=20
'
ABC-
2 000 user