abc 2000 Series User Manual page 48

Speed loop proportional
P3.00
Speed loop integral time 1
P3.01
Setting Range
Switchover frequency 1
P3.02
Setting Range
Speed loop proportional
P3.03
Setting Range
Spead loop integral time 2 Dofault
P3.04
Setting Range
Switchover frequency 2
P3.05
Setting Range
Speed loop Pl parameters vary with running frequencies of the AC
drive.
If the running frequency is less than or equal to "Switchover
frequency 1" (P3.02), the speed loop Pl parameters are P3.00 and
P3.01.
If the running frequency is equal to or greater than "Switchover
frequency 2" (P3.05), tho speed loop Pl parameters am P3.03 and
P3.04.
If the running frequency is between P3.02 and P3.05, the speed
loop Pl para.meters are obtained from the linear switchover between
two
the groups of Pl parameters, as shown in Figure 4-4
P3.00
P3.0l
P3.03
P3.04
4- 4
Figure RelaUonshlp between running frequency and
gain 1
gain 2
Pl
"""'" "" "
'
'
'
P3,02
Detailed Function
Default
1-100
Dofault
0.01s-10.00s
Default
O.OO-P3.05
Default
0-100
0,01s-10.00s
Default O.OOHz
P3.02-maximum output frequency
P3.05
Pl parameters