abc 2000 Series User Manual page 78

It is used to display the accumulative power consumption of the AC
drive until now.
Group Pll: Auxiliary Functions
JOG runnino frequen""
PB.OD
JOG acceleration time
PB.01
Setting RangelO.Os-6500.0s
JOG deceleration time
PB.02
Setting RangelO.Os-6500.0s
These parameters are used to define the set frequency and
acceleration/deceleration time of the AC drive when jogging. The
startup mode is "Direct start" (P1 .00
"Decelerate to stop" (P1 . 1 0
Acceleration time 2
PB.03
Setting Range !O.Os-6500.0s
Deceleration time 2
PB.04
Acceleration time 3
PB.05
Setting Range !O.Os-6500.0s
Deceleration time 3
PS.06
Setting Range !O.Os-6500.0s
Acceleration time 4
PB.07
Deceleration time 4
PB.OB
Setting Range IO.Os-6500.0s
ABC
The 2000 provides a total of four groups of acceleration/
eceleration time, that is, the preceding three groups and thed
roup defined by P0.08 and P0.09. Definitions of four groups areg
ompletely the same. You can switch over between the fourc
roups of acceleration/deceleration time through different stateg
ombinations S terminals. For more details, see the descriptions ofc
Jump frequenrw 1
PS.09
Setting Range IO.OOHz-maximum frequency
Jump frequency 2
PB.10
Frequency jump amplitude I Default
PB.11
Setting Range 10.00-maxi m um frequency
Detailed Function
0) and tho stop mode is
=
0) during jogging.
=
P5.01 to P5.05.