abc 2000 Series User Manual page 109

2: Repeat after the AC drive runs one cycle
The AC drive automatically
cycle, and will not stop until receiving the stop command.
Simple PLC function has two effects: the frequency source or V/F
separated voltage source.
When simple PLC is used as the frequency source, whether
parameter values of PC. 00 to PC. 1 5 are positive or negative
determines the running direction. If the parameter values are
negative, it indicates that the AC drive runs in reverse direction.
PCJ9
MO!
ooqmt
Figure
As the frequency source.PLC has three running modes.as V/F
separated voltage sourca,it doesn't have the three modes.Among
them,
0: Stop after the AC drive runs one cycle
The AC drive stops after running one cycle, and will not start up until
receiving another command.
1 : Keep final values after the AC drive runs one cycle.The AC drive
keeps the final running frequency and direction after running one
cycle.
2: Repeat after the AC drive runs one cycle
PC.21
,.._ _. ..
PCJ!l PC..20
4-28
PLC
Simple
starts another cycle after running one
PC.02
PC..23
when used as frequency source
04
1
· ·
PC.14
�
-
250�
Tnm: (t)