abc 2000 Series User Manual page 38

All the parameters used to determine the resolution of 1he function
code associated with the frequency.
When the frequency resolution of 0. 1 Hz,
frequency can reach 3200 Hz, and tho frequency resolution of 0.01
Hz, MT-2000 maximum output frequency of 320.00 Hz.
Nole: Modify t he fu nction pa rameters, all related lo the frequency
parameters of decimal digits will change, the corresponding
frequency values also produces change, pay special attention in the
applications.
Retentive
P0.23
Setting Range
The function of frequency source for digital only effective when
setting.
"No memory" refers to the inverter after downtime, digital frequency
values revert lo P0.10(frequancy prasal)value, the keyboard bring
A, T
button or tenninal is UP and DOWN to correct the frequency
is reset
"Memory" refers
set
keep for the last moment of downtime, bring about keyboard
'1'
button or terminal is UP and DOWN to correct the frequency of
remain valid.
Acce l era.Uon/Deceleration
time
P0.24
Setting Range
Acce l eration/Deceleration time, refers to the frequency from zero to
P0.24 set frequency between the Acceleration/Deceleration time.
When the P024 is selected to 1 , deceleration time is associated with
set
a frequency, if sat frequency change frequently, the acceleration
of the motor is variable, pay attention to the application.
Base frequency fo r UP/DOWN
modification during running
P0.25
Setting Range
This parameter is only valid when frequency source for the digital
setting.
digital setting
of
n power
0
the inverter after downtime , digital
to
base
frequency
0
1
2
0
1
Detailed Function
ABC
2000 maximum output
Default
No memory
Memory
Default
Maximum frequency
Set fr e quenr.v
100Hz
Default
Running frequency
Set frequency
set
frequency
A ,
(P0.12)