abc 2000 Series User Manual page 39

Used to determine the bring
UP/DOWN action, adopt what way set frequency correction, the
target frequency is based on the operating frequency, increase or
decrease or based on a set frequency increase or decrease. Two
set of distinction, evident when inverter in the deceleration process,
namely, if the operation of the inverter frequency and setting
frequency is not at the same time, the parameter of the different
selection difference is very big.
Binding command source to
frequency source
P0.26
Setting Range
It is used to bind the three running command sources with the
nine frequency sources, facilitating to implement synchronous
switchover.
For details on the frequency sources, see the description of P0.03
(Main frequency source X selaction}.Diffarent running command
sources can be bound to the same frequency source.
If a command source has a bound frequency source, when the
process of frequency source Is effective.the command source set In
P003 to P007 will no longer work.
Communication
P0.27
expansion card
Setting Range
&. 'Y
button or terminal
,
Default
Binding operation panel command
digit
Unit's
frequency source
0
No binding
1
frequency source
2
FIV
FIC
3
4 Reserved
5
Pulse setting (S3)
m rnfei m
6
l
M
u ti
7 Simple PLC
8 PIO
9
Communication setting
Binding termlnal command to frequency
T en's digit
source(o-9, same as unit's digit)
Binding communication command to
Hundred's
frequency source{0-9, same as unit's
digit
digit)
Default
o
Modbus communication
of
by
digital setting
ce
n
0
card
the keyboard
to