Heat Exchanger - Kodak X-Omat 460 RA Processor Installation Instructions Manual

Installing the Heat Exchanger Cover and Racks
[1] When the processor is positioned in its final location against the wall, unwrap the items removed during
the Unpacking Procedure.
[2] Install the DEVELOPER HEAT EXCHANGER COVER into the bottom of the DEVELOPER TANK.
Make sure that the HEAT EXCHANGER COVER is pushed completely down.
14
DEVELOPER
TANK
DEVELOPER

HEAT EXCHANGER

COVER
Figure 16 Installing the Developer Heat Exchanger Cover
NOTE
HEAT
EXCHANGER
H108_0118CCA
H108_0118CA
636738